Types of Ethernet cables – straight-through and crossover

Ethernet cables can come in two forms when it comes to wiring:

1. Straight-through cable

This cable type has identical wiring on both ends (pin 1 on one end of the cable is connected to pin 1 at the other end of the cable, pin 2 is connected to pin 2 etc.):

Straight-through cable

This type of cable is used to connect the following devices:

  • computer to hub
  • computer to switch
  • router to hub
  • router to switch

Computers and routers use wires 1 and 2 to transmit data and wires 3 and 6 to receive data. Hubs and switches use wires 1 and 2 to receive data and wires 3 and 6 to send data. That is why, if you want to connect two computers together, you will need a crossover cable.

2. Crossover cable

With the crossover cable, the wire pairs are swapped, which means that different pins are connected together – pin 1 on one end of the cable is connected to pin 3 on the other end, pin 2 on one end is connected to pin 6 on the other end (Photo credit: Wikipedia):

crossover cable

This type of cable is used when you need to connect two devices that use same wires to send and receive data. For example, consider connecting two computers together. If you use straight-through cable, with identical wiring in both ends, both computers will use wires 1 and 2 to send data. If computer A sends some packets to computer B, computer A will send that data using wires 1 and 2. That will cause a problem because computers expect packets to be received on wires 3 and 6, and your network will not work properly. This is why you need to use a crossover cable for such connections.

Newer devices support the Auto MDI-X capability to automatically detect and configure the required cable connection type. This removes the need for a specific cable type between certain devices. Also, note that the Gigabit Ethernet and faster standards use all four wire pairs to transfer data in both direction simultaneously.

Prerequisites for 200-301

200-301 is a single exam, consisting of about 120 questions. It covers a wide range of topics, such as routing and switching, security, wireless networking, and even some programming concepts. As with other Cisco certifications, you can take it at any of the Pearson VUE certification centers.

Get the Latest Full Version 200-301 Dumps