Microsoft 70-642 TS: Windows Server 2008 Network Infrastructure, Configuring Certification

Ensurepass
Microsoft 70-642 TS: Windows Server 2008 Network Infrastructure, Configuring Certification 06-10

6. You have a Windows Server 2008 R2 computer that has an IP address of 172.16.45.9/21.
The server is configured to use IPv6 addressing.
You need to test IPv6 communication to a server that has an IP address of 172.16.40.18/21.
What should you do from a command prompt?
A. Type ping 172.16.45.9:::::.
B. Type ping ::9.45.16.172.
C. Type ping followed by the Link-local address of the server.
D. Type ping followed by the Site-local address of the server.
Answer: C

7. Your company has four DNS servers that run Windows Server 2008 R2. Each server has a static IP address.
You need to prevent DHCP from assigning the addresses of the DNS servers to DHCP clients.
What should you do?
A. Create a new scope for the DNS servers.
B. Create a reservation for the DHCP server.
C. Configure the 005 Name Servers scope option.
D. Configure an exclusion that contains the IP addresses of the four DNS servers.
Answer: D

8. You have a DHCP server named Server1 and an application server named Server2. Both servers run Windows Server 2008 R2. The DHCP server contains one scope.
You need to ensure that Server2 always receives the same IP address. Server2 must receive its DNS settings and its WINS settings from DHCP.
What should you do?
A. Create a multicast scope.
B. Assign a static IP address to Server2.
C. Create an exclusion range in the DHCP scope.
D. Create a DHCP reservation in the DHCP scope.
Answer: D

9. You have a DHCP server that runs Windows Server 2008 R2.
You need to reduce the size of the DHCP database.
What should you do?
A. From the DHCP snap-in, reconcile the database.
B. From the folder that contains the DHCP database, run jetpack.exe dhcp.mdb temp.mdb.
C. From the properties of the dhcp.mdb file, enable the File is ready for archiving attribute.
D. From the properties of the dhcp.mdb file, enable the Compress contents to save disk space attribute.
Answer: B

10. You have a DHCP server that runs Windows Server 2008 R2. The DHCP server has two network connections named LAN1 and LAN2.
You need to prevent the DHCP server from responding to DHCP client requests on LAN2. The server must continue to respond to non-DHCP client requests on LAN2.
What should you do?
A. From the DHCP snap-in, modify the bindings to associate only LAN1 with the DHCP service.
B. From the DHCP snap-in, create a new multicast scope.
C. From the properties of the LAN1 network connection, set the metric value to 1.
D. From the properties of the LAN2 network connection, set the metric value to 1.
Answer: A

Ensurepass offers the Latest 2013 70-642 Exam PDF to pass the exams.